Features:
Can be used to heat embossed powder and shrink film
Leave the work at a distance of 3-5 cm and heat it at an angle of about 45 degrees until it is complete.
When finished, use a high-temperature heat gun to blow for a few seconds
It can not only increase hardness, but also increase brightness
The temperature cannot be adjusted, theoretically it can reach 200 degrees within a few seconds
Do not work for more than 10 minutes and blow at a 45 degree angle to avoid heat absorption. Be careful when using a heat gun
Specification:
Color: black
Material: ABS
Type: Constant temperature
Operating temperature: 200°C / 390°F can be reached within a few seconds
Rated power: 300W
Power type: AC power
Rated voltage: 220V & 230V
Power: 50Hz
Working time: 8 minutes
Material: Steel Plastic
Working temp.: 200 °C
Rated Power: 300W
Rated voltage: Input Voltage: UK Plug(220V)
Plug Type: UK Plug
Usage:
1. Insert the heating tool
2. Hold the spray gun but do not touch the hot nozzle
3. Keep the heat gun at a distance of 5-6cm from your work, and heat it at about 45° until the work is completed
4. Turn off the power to keep it cool
